The Graco Magnum LTS 17 airless paint sprayer is an excellent choice for homeowners looking to achieve professional quality results — without hiring a painting contractor. Whether you are painting or staining your home, deck, house walls, and other paint projects the machine will give that great finish.
1. What is the Graco Magnum LTS 17?
Techniques aside, you need to know what is so special about the Graco Magnum LTS 17. The powerful motor and adjustable pressure control, as well as the ability to handle unthinned paint, make this airless one of the best sprayers for large projects. The stainless steel piston pump lets you spray at high pressure for an even, fine coating. A flexible suction tube allows you to spray directly from a 1 or 5-gallon paint container and the long, fifty-foot hose helps with not having to move your sprayer as often while also allowing coverage of enough area.
2. Preparing: The Secret to a Perfect Manicure
As with all paint sprayers, preparation is everything and the Graco Magnum LTS 17 is no exception. Read on to ensure your project gets started right. The first step is cleaning the surface, and it should be clear of dust dirt grease. Before you start the paint process, give it a simple wash using mild detergent and water; make sure that area is dry as well.
- Mask and Cover Surrounding Areas: You should use painter’s tape along with plastic sheeting to cover areas that are not supposed to be painted. Windows, trim, and floors Not only will this prevent accidental overspray, but it also provides a clean and professional finish.
- Before You Dependable Spraying: Prime the Graco Magnum LTS 17 To do this, you are filling paint into the pump through the tube and hose to ensure steady flow (and no air bubbles). Refer to the user manual for priming instructions.
- Strain the Pain: You need to strain every paint before adding it to a sprayer. It otherwise removes the debris or clumps that would clog the nozzle and create an uneven finish. Filter the paint through a mesh screen or a paint strainer.
3. Balancing Pressure To Achieve The Best Results
Best Feature: Adjustable Pressure Control — one of the key features this paint sprayer offers is its adjustable pressure control. Correct adjustment of the pressure is important to ensure a perfect surface finish
- Start with Low Pressure- Begin at the lowest pressure setting and slowly increase until you get a smooth spray pattern. Too much pressure will lead to overspray and blotchy coverage, while too little will leave a streaky finish.
- Spray Test: Before spraying your project, test the sprayer on scrap material. This way you can adjust the pressure and sprayer range for optimal results.
- Select the Best Spray Tip: The Graco Magnum LTS 17 provides several interchangeable spray tips to be use on your paint and venture. For example, you would use a small tip for stains and similar thin materials while using the largest tip available to spray latex house paint. The tip size and type will affect the spray pattern and coverage for your specific project.
4. Smooth Finish with Spray Applications
When spraying with the Graco Magnum LTS 17 siphon-off gun, you will need to have proper technique if you want a perfect finish.
- Distance Control: Keep the spray gun 12-18 inches from your surface and adjust this distance accordingly throughout spraying. The gun also be too far away and cause overspray with a thin coat.
- Apply Even Coats: Spray smooth, even passes at a slight overlap (50 percent) with each new pass This makes sure that the application is uniform and streaks or lines are not left behind.
- Gun Style — For Most Spraying Hold the gun right side up and perpendicular to what you’re spraying. One of the biggest mistakes decorators make when using a paint spay gun is to tilt it sideways, which can lead to poor color application and an unprofessional finish.
5. Cleaning and Maintenance
Cleaning your Graco Magnum LTS 17 to perfection — If you are already working hard, then cleaning the sprayer correctly is a problem that many professionals encounter all year round.
- Take Apart and Clean the Parts: Disassemble The spray gun, Tip & Filters — Remove all parts to be clean separately! It is then flush with a clear coating to get any paint solids out in order not to clog the tips during its next use.
- Thoroughly Inspect and Replace Worn Parts: Check spray tips, filters, hoses, etc routinely for wear. Replace all the worn components to keep your machine in top shape and prevent failure during any future project.
Conclusion
Getting a flawless outcome is trickier with the Graco Magnum LTS 17, but you must focus on preparation, pressure settings, and correct execution. Following these steps as a guide to prep and clean properly will make your DIY painting jobs look professional in no time. Simply follow this step-by-step guide and take great care of your Graco Magnum LTS 17, you are guarante flawless results delivered over many years ahead.